JezK

Edit File: sockios.h

/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Definitions of the socket-level I/O control calls. * * Version: @(#)sockios.h 1.0.2 03/09/93 * * Authors: Ross Biro * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #ifndef _LINUX_SOCKIOS_H #define _LINUX_SOCKIOS_H #include <asm/sockios.h> /* Linux-specific socket ioctls */ #define SIOCINQ FIONREAD #define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ /* Routing table calls. */ #define SIOCADDRT 0x890B /* add routing table entry */ #define SIOCDELRT 0x890C /* delete routing table entry */ #define SIOCRTMSG 0x890D /* unused */ /* Socket configuration controls. */ #define SIOCGIFNAME 0x8910 /* get iface name */ #define SIOCSIFLINK 0x8911 /* set iface channel */ #define SIOCGIFCONF 0x8912 /* get iface list */ #define SIOCGIFFLAGS 0x8913 /* get flags */ #define SIOCSIFFLAGS 0x8914 /* set flags */ #define SIOCGIFADDR 0x8915 /* get PA address */ #define SIOCSIFADDR 0x8916 /* set PA address */ #define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ #define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ #define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ #define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ #define SIOCGIFNETMASK 0x891b /* get network PA mask */ #define SIOCSIFNETMASK 0x891c /* set network PA mask */ #define SIOCGIFMETRIC 0x891d /* get metric */ #define SIOCSIFMETRIC 0x891e /* set metric */ #define SIOCGIFMEM 0x891f /* get memory address (BSD) */ #define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ #define SIOCGIFMTU 0x8921 /* get MTU size */ #define SIOCSIFMTU 0x8922 /* set MTU size */ #define SIOCSIFNAME 0x8923 /* set interface name */ #define SIOCSIFHWADDR 0x8924 /* set hardware address */ #define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ #define SIOCSIFENCAP 0x8926 #define SIOCGIFHWADDR 0x8927 /* Get hardware address */ #define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ #define SIOCSIFSLAVE 0x8930 #define SIOCADDMULTI 0x8931 /* Multicast address lists */ #define SIOCDELMULTI 0x8932 #define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ #define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ #define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ #define SIOCGIFPFLAGS 0x8935 #define SIOCDIFADDR 0x8936 /* delete PA address */ #define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ #define SIOCGIFCOUNT 0x8938 /* get number of devices */ #define SIOCGIFBR 0x8940 /* Bridging support */ #define SIOCSIFBR 0x8941 /* Set bridging options */ #define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ #define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ /* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ /* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ #define SIOCETHTOOL 0x8946 /* Ethtool interface */ #define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ #define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ #define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ #define SIOCWANDEV 0x894A /* get/set netdev parameters */ #define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ /* ARP cache control calls. */ /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ #define SIOCDARP 0x8953 /* delete ARP table entry */ #define SIOCGARP 0x8954 /* get ARP table entry */ #define SIOCSARP 0x8955 /* set ARP table entry */ /* RARP cache control calls. */ #define SIOCDRARP 0x8960 /* delete RARP table entry */ #define SIOCGRARP 0x8961 /* get RARP table entry */ #define SIOCSRARP 0x8962 /* set RARP table entry */ /* Driver configuration calls */ #define SIOCGIFMAP 0x8970 /* Get device parameters */ #define SIOCSIFMAP 0x8971 /* Set device parameters */ /* DLCI configuration calls */ #define SIOCADDDLCI 0x8980 /* Create new DLCI device */ #define SIOCDELDLCI 0x8981 /* Delete DLCI device */ #define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ #define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ /* bonding calls */ #define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ #define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ #define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ #define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ #define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ #define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ /* bridge calls */ #define SIOCBRADDBR 0x89a0 /* create new bridge device */ #define SIOCBRDELBR 0x89a1 /* remove bridge device */ #define SIOCBRADDIF 0x89a2 /* add interface to bridge */ #define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ /* hardware time stamping: parameters in linux/net_tstamp.h */ #define SIOCSHWTSTAMP 0x89b0 /* set and get config */ #define SIOCGHWTSTAMP 0x89b1 /* get config */ /* Device private ioctl calls */ /* * These 16 ioctls are available to devices via the do_ioctl() device * vector. Each device should include this file and redefine these names * as their own. Because these are device dependent it is a good idea * _NOT_ to issue them to random objects and hope. * * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM */ #define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ /* * These 16 ioctl calls are protocol private */ #define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ #endif /* _LINUX_SOCKIOS_H */